Model: BGMP-300
● Single Seal
● Independent of Direction of Rotation
● Balanced
● Semi-split

The BGMP series semi-split mechanical seals are used if there is a sufficient axial clearance to pull off the seal housing and seat housings until the sliding parts are accessible. I. e. only the wearing parts proper, such as the seal face and stationary seat as well as O-rings are split. The seal face and stationary seat, springs and O-rings can thus be replaced without requiring complete disassembly. Springs are arranged to be protected from the medium. The split stationary seat can be used in either side.


Materials for Mechanical Seals:
● Face Materials: Carbon Graphite / Silicon Carbide/ Tungsten Carbide
● Secondary Seal Components: NBR/VITON/EPDM
● Spring and Construction Materials: Stainless Steel


Operating Limits:
● Pressure: ≤2.5MPa
● Temperature : -20℃~150℃
● Linear Velocity: ≤20M/S