Brand: yuan
Model: YAT6810
Barrier
Bridge-type Swing Barrier
Details：
◇Framework: 304 Grade Stainless Steel
◇Specification: L1400*W300*H1000(mm)
◇Weight: 140(kg)
◇Arm length: 285(mm)
◇Interface: standard port-RS485
◇Power voltage: AC220 (10%more or less) V, 50HZ
◇Drive voltage: 24V
◇Transit speed: 30—40persons per minute
◇Working Environment: Indoor/Outdoor (with a tent over)
◇Temperature: 10 below degree to 50 degree
◇Humidity: ≤90%
Function
◇With function of self-examine and alarms, it is convenient for users to maintain and use.
◇It will raise the alarm by means of a sound or light when someone pushes in illegally.
◇The mechanism is locked until a valid open signal is received.
◇Reset automatically--Go signal will be cancelled if passage through is not completed within pre-set time. The standard default is 5 seconds.
◇Unit can be adjusted permanent open or close when power off to meet different needs. Unit can be controlled and administered by remote control
Extensible function:
◇count
◇Material of arms is optional
Users:
Station/Subway/offices/airports/government/market/exhibition
◇Indoor, outdoor(shade shed)
◇Temperature: -10℃—— 50℃
◇Relative Humidity: ≤90%, no coagulation

2、Main Specification
1）It has malfunction self-check and alarm, convenient for users to use and maintenance.
2) The status of running of the device can be set by the small inner board in the main control board.
3) Anti-nip, anti bump, the motor can stop working automatically in setting time when the arm meet block during the process of restoration. Then restoration again after pretermission delay, and the force is very small.
4）Anti-rush, the arm can be locked when no signal of opening was received.
5）Swing arm synchronization
6) Automatic restoration, passenger do not pass after the arm open, the system would cancel his right of passing automatically.
7）Normal open or normal close can be set freely, in order to meet different requirements.
8）The standard setting is restoration automatically after opening for 5 s.
9）The arm open automatically when the power is off, and close when the power is on, these meet the requirements of fire protection.
3、Main structure and configure
◇Main pillar 1 pcs
◇Swing arm 1 pcs
◇Main control board 1 series
◇Transformer 2 pcs
◇Motor 1 pcs
◇Chassis and transmission parts 1 series