Brand: Hengshun Security
Price: CNY Taiwan
Min. Order: 1
Three roller gate
Gate before
Gate block
Column before gate



Product Model:

Technical parameters: the upgrading of products and powerful. It is a good solution to the shopping malls before the gate can only be characterized by one-way traffic, the wider application of the venue, which can be expanded more. ⊙ standard features: two-way gate opening, two-way delay reduction; also the same functionality can be extended

Details:

Upgraded products and powerful. It is a good solution to the shopping malls before the gate can only be characterized by one-way traffic, the wider application of the venue, which can be expanded more.
⊙ standard features: two-way gate opening, two-way delay reduction; YAT6608 can also be extended with the same function
1, the technical parameters:
1.1 Structure: 304 / 2.0 and 1.0 stainless steel shell
1.2 Overall dimension:
◇ main column diameter: 168mm.
1.3 Weight: 40Kg
1.4 Arm length: 500mm-900mm
1.5 Arm's largest endurance: 30Kg
1.6 Transmission Arm angle: 180 degrees
1.7 Swing Direction: two-way
1.8 Working power: AC220 ± 10% V/50 ± 10% HZ
1.9 Drive motor: DC brush motor (24V)
1.10 input: dry contact signal or 12V level signals or pulse width ≥ 100ms pulse of 12V, the drive current ≥ 10mA
1.11 Communication Interface: RS485 standard communication distance ≤ 1200 meters
Prevailing rate of 1.12: 40 people / minute (always) 25-30 / min (regular closed)
1.13 gates open, clearing time: 1-2 seconds
1.14 toll to enter the power state after the time required: 3 seconds
1.15 after the failure of the automatic reset time: 10 seconds
1.16 work environment:
◇ indoor and outdoor (Yam studio)
◇ temperature: -10 ℃ - 50 ℃
◇ relative humidity: ≤ 90%, do not Rich

2, the main functions and features
1) has a self-test and fault alarm function, maintenance and use of user-friendly;
2) through the control panel built by a small disk, programmable equipment operation;
3) mechanical structure防夹, anti-bumps function, reduction in the arm when the process of resistance, within the required timeframe motor automatically stop working, the default reset after delay (until the reset date), and the intensity is small ( ≤ 2Kg);
4) erosion function, gate opening in the absence of received signal auto-arm-lock;
5) Arm synchronization (for two-place, off the case);
6) with automatic reset function, after the gate opening, within the required timeframe is not current, the system will automatically cancel the user's access privileges;
7) adjustable normally closed or normally open to meet the requirements of different locations;
8) induction or auto-reset delay, the standard for the open 5 seconds (adjustable) Automatic reset;
9) Auto power-off arm swing, automatically closing power, comply with fire safety requirements

3, the main structure and configuration
◇ main column 1
◇ Arm 1
◇ control panel 1 set
◇ Transformers 2
◇ Electric 1
◇ movement and the transmission part of a set of