Brand: Polar
Model: 单结/双结
a-si module
amorphous sillicon thin film module
pv module
Specifications of amorphous silicon thin film PV module
(Single Junction)

　　　　　　The Polar-PV module is a thin film photovoltaic module with amorphous
　　　　silicon (a-Si) devices monolithically integrated. The electrical specifications
　　　　shown below are stabilized values measured at Standard Report Conditions:
　　　　1000W/m2 irradiance, AM1.5 spectrum at 25℃ while Voc or Isc can be
　　　　customized.

Maximum power rating under standard report conditions:
Wp = 40 W ± 10%

Rated operating voltage:
Vm = 41 V ± 5 %

Rated operating current:
Im = 0.98 A ± 5 %

Open circuit voltage:
Voc = 56 V ± 5 %

Short circuit current :
Isc = 1.21 A ± 5 %

Temperature coefficients:
Pm = – 0.2% / °C

Bypass diode:
6A1000V

Maximum system voltage:
600V

Lateral structuring:
Laser pattern

Fixture:
Aluminum frame or frameless

Dimensions: Width x Length x Depth
25 inch x 49 inch x 0.275 inch

( 635mm x 1245 mm x 7 mm )

Temperature Range :
–40°C to +85°C

Weight:
30 lbs . ( 13.7 kg )


Output of electricity in the first few months of operation will exceed the specified ratings around 20% for power output.
Other factors, such as operation at higher temperature, change of spectrum and other relevant factors, may cause actual performance to vary up to 10% from rated parameters.
Module is glass to glass laminated.
IEC61646, IEC61730-2 qualification, TüV and UL testing are pending.
Twenty years limited warranty.


Specifications of amorphous silicon thin film PV module
(Tandem Junction)

　　　　　　The Polar-PV module is a thin film photovoltaic module with amorphous
　　　　silicon (a-Si) devices monolithically integrated. The electrical specifications
　　　　shown below are stabilized values measured at Standard Report Conditions:
　　　　1000W/m2 irradiance, AM1.5 spectrum at 25℃ while Voc or Isc can be
　　　　customized.

Maximum power rating under standard report conditions:
Wp = 41 W ± 10%

Rated operating voltage:
Vm = 59.0 V ± 5 %

Rated operating current:
Im = 0.70 A ± 5 %

Open circuit voltage:
Voc = 77 V ± 5 %

Short circuit current :
Isc = 0.90 A ± 5 %

Temperature coefficients:
Pm = – 0.2% / °C

Bypass diode:
6A1000V

Maximum system voltage:
600V

Lateral structuring:
Laser pattern

Fixture:
Aluminum frame or frameless

Dimensions: Width x Length x Depth
25 inch x 49 inch x 0.275 inch

( 635mm x 1245 mm x 7 mm )

Temperature Range :
–40°C to +85°C

Weight:
30 lbs . ( 13.7 kg )


Output of electricity in the first few months of operation will exceed the specified ratings
around 15 % for power output.
Other factors, such as operation at higher temperature, change of spectrum and other relevant factors, may cause actual performance to vary up to 10% from rated parameters.
Module is glass to glass laminated.
IEC61646, IEC61730-2 qualification, TüV and UL testing are pending.
Twenty years limited warranty.