Long Electronic Technology Co., Ltd. Suzhou 100 000 000
Inquire Now
Packaging Materials >

Pe Surface Protective Film / Stainless Steel Protective Film / Glass Lens Protec

Pe Surface Protective Film / Stainless Steel Protective Film / Glass Lens Protec

Pe Surface Protective Film / Stainless Steel Protective Film / Glass Lens Protec

Detailed Selling Lead Description
PE surface protective film / stainless s
PE surface protective film / stainless steel protective film / glass lens protection film

Colors are: transparent, blue, green, cream, black and white and so on.



PE protective film performance: According to tack points mainly: low sticky protective film, protective film of low viscosity, low viscosity protective film, protective film of sticky, viscous and protective film, super sticky protective film

1. Low sticky protective film (that is, the end of stick micro):

Characteristics: thick (≥ 0.03m ± 0.003), width (≤ 1.3), high (100-1500), substrate (PE), peel strength (≤ 5g/cm), temperature (60), strain rate (> 400)

Use: easy to use easy to tear easily attached, no residue on the phenomenon for organic sheets, instruments, displays, glass lenses, plastic lenses, etc..

2. Low viscosity protective film

Characteristics: thick (≥ 0.03m ± 0.003), width (≤ 1.3), high (100-1000), substrate (PE), peel strength (10-20g/cm), temperature (60), strain rate ( > 400)

Uses: bonding strength and stability, good adhesion, good performance and then peeled off, no residue on the phenomenon, applied to steel mirror plate, titanium metal, smooth plastic plate, screen printing, aluminum name plates, etc..

3. In the protective layer of low viscosity

Characteristics: thick (≥ 0.03m ± 0.003), width (≤ 1.3), high (100-1000), substrate (PE), peel strength (30-50g/cm), temperature (60), strain rate ( > 400)

Uses: bonding strength and stability, good adhesion, good performance and then peeled off, no residue on the phenomenon, applied to furniture Polaroid sheet, stainless steel plates, ceramic tile, marble, artificial stone and so on.

4. The sticky protective film

Characteristics: thick (≥ 0.05 ± 0.003), width (≤ 1.3), high (100-1000), substrate (PE), peel strength (60-80g/cm), temperature (60), strain rate (> 400)

Uses: bonding strength and stability, good adhesion, good performance and then peeled off, no residue on the phenomenon, applied to fine lines and generally difficult to stick matte board surface protection.

5. Viscous protective film

Characteristics: thick (≥ 0.05 ± 0.003), width (≤ 1.3), high (100-800), substrate (PE), peel strength (80-100g/cm), temperature (60), strain rate (> 400)

Uses: bonding strength and stability, good adhesion, good performance and then peeled off, no residue on the phenomenon, applied to fine lines and frosted panels, aluminum panels, plastic sheets and other hard to bond.

6. Super sticky protective film

Characteristics: thick (≥ 0.04 ± 0.003)