Transparent protective film / instrument
Transparent protective film / instrumentation protective film / cream, protective film

Protective film performance: According to tack points mainly: low sticky protective film, protective film of low viscosity, low viscosity protective film, protective film of sticky, viscous and protective film, super sticky protective film

Colors are: transparent, blue, green, cream, black and white and so on.



1. Low sticky protective film (that is, the end of stick micro):

Characteristics: thick (≥ 0.03m ± 0.003), width (≤ 1.3), high (100-1500), substrate (PE), peel strength (≤ 5g/cm), temperature (60), strain rate (> 400)

Use: easy to use easy to tear easily attached, no residue on the phenomenon for organic sheets, instruments, displays, glass lenses, plastic lenses, etc..

2. Low viscosity protective film

Characteristics: thick (≥ 0.03m ± 0.003), width (≤ 1.3), high (100-1000), substrate (PE), peel strength (10-20g/cm), temperature (60), strain rate ( > 400)

Uses: bonding strength and stability, good adhesion, good performance and then peeled off, no residue on the phenomenon, applied to steel mirror plate, titanium metal, smooth plastic plate, screen printing, aluminum name plates, etc..

3. In the protective layer of low viscosity

Characteristics: thick (≥ 0.03m ± 0.003), width (≤ 1.3), high (100-1000), substrate (PE), peel strength (30-50g/cm), temperature (60), strain rate ( > 400)

Uses: bonding strength and stability, good adhesion, good performance and then peeled off, no residue on the phenomenon, applied to furniture Polaroid sheet, stainless steel plates, ceramic tile, marble, artificial stone and so on.

4. The sticky protective film

Characteristics: thick (≥ 0.05 ± 0.003), width (≤ 1.3), high (100-1000), substrate (PE), peel strength (60-80g/cm), temperature (60), strain rate (> 400)

Uses: bonding strength and stability, good adhesion, good performance and then peeled off, no residue on the phenomenon, applied to fine lines and generally difficult to stick matte board surface protection.

5. Viscous protective film

Characteristics: thick (≥ 0.05 ± 0.003), width (≤ 1.3), high (100-800), substrate (PE), peel strength (80-100g/cm), temperature (60), strain rate (> 400)

Uses: bonding strength and stability, good adhesion, good performance and then peeled off, no residue on the phenomenon, applied to fine lines and frosted panels, aluminum panels, plastic sheets and other hard to bond.

6. Super sticky protective film

Characteristics: thick (≥ 0.04 ± 0.003), width (≤ 1