Henan Jingxin Machineryco,Ltd
Inquire Now

Agriculture Products Processing

Briquette Machine For Coal Power

Briquette Machine For Coal Power

2007-11-5
Production capacity (pics/minute) 50pics/minute Specification (MM) Diaz 140*80-12holes Motor power( kw) 7.5KW Size (mm) 1629*1210*1930 Weight (kg) 4000kg The...
Hammer Crusher

Hammer Crusher

2007-11-5
It used to crush the middle rigid material with the brittleness such as line, coal; the most rigid should be less than...
Chipper

Chipper

2007-11-5
This machine is used to chop the log and bamboo with the diameter 200mm into chips with 20mm forward to hammer mill. But the only fault of this machine is that it...
Briquette Machine For Babecue Charcoal

Briquette Machine For Babecue Charcoal

2007-11-5
This machine is used to make briquettes in charcoal, medicine, food, industry processing area. It is automatic, which can make the powder into briquettes with...
Briquette Machine For Babecue Charcoal

Briquette Machine For Babecue Charcoal

2007-11-5
This machine is used to make briquettes in charcoal, medicine, food, industry processing area. It is automatic, which can make the powder into briquettes with...
Briquette Machine For Ball

Briquette Machine For Ball

2007-11-5
It is widely applied to produce powdered coal and fine coke balls, powered coal bar of fertilizer industry, applicable to mineral ball of chemical industry,...
Oil Press Machine

Oil Press Machine

2007-11-5
Screw type presses are advanced oil processing machinery, characterized by their simple design, easy to use, wide suitability and continuous operation; and high...
Drier For Coal

Drier For Coal

2007-11-5
This machine is used to carbonize the half-products into finished products. It is equipped with hyperploids high temperature steam cooling system and the process of...
Drying Machine

Drying Machine

2007-11-5
If the moisture of the material is above 12%, the drying machine is needed to dry the moisture from 12% to 6%-8% before the material (e.g. sawdust) was put into...
Crusher

Crusher

2007-11-5
If the material is bigger than 5*5mm, ( e .g . branch, husk) and smaller than 200mm, there is necessary to crush the material into 5*5mm for further...