Brand: Henan Shuangzhi
Model: depending on designs
Price: CNY 1000 / piece
Min. Order: 1 piece
Forged Sprocket
Scraper Conveyor
Coal Mine
The sprocket body of mine sprocket assembly is forged as a whole, and the tooth shape is formed by numerical control processing. After some processing and processing of the mine sprocket assembly manufacturers, the installation is carried out by the output of the reducer through the sprocket shaft to the sprocket spline, so as to drive the operation of the whole scraper chain. The mine sprocket assembly can also be dismantled in the head part of the machine as a whole, so as to facilitate the maintenance of the sprocket assembly manufacturers.

In use, we need to pay attention to the mining sprocket assembly of the nose and tail. After being put into use, if the tooth surface wear of one side of the sprocket body exceeds 2mm, we suggest that the mining sprocket assembly manufacturer carry out surfacing welding repair and grinding treatment, or change the installation direction of the mining sprocket assembly to extend its service life. If the sprocket body tooth surface wear is more than 6 mm, or there is a chain card, jump chain, we need to immediately stop using, to prevent the occurrence of safety accidents.

In the working process of the mine sprocket assembly, if the gangue or other sundries lead to the chain is not cleaned up in time, the clearance between the various accessories is small in the assembly, the bearing is misplaced, and the oil is not injected in time, we need to pay attention to the problem.

There is also in the purchase of sprocket components, we should take into account the construction period, product material and service life, etc., for sprocket components manufacturers different processing technology will have different effects. For more information about sprocket components, pay attention to Henan Shuangzhi. If you have demand for sprocket components and accessories, please consult Henan Shuangzhi