Black Mylar PET film milky polyester fil
Black Mylar PET film milky polyester film Mylar film

Introduction

Supply black Mylar film, black PET thickness: 0.025mm/0.038mm/0.05mm/0.075mm/0.10mm/0.125mm/0.15mm/0.188mm/0.25mm/0.35mm black PET characteristics: degree of uniform black shade of lust, permanent, smooth surface with good mechanical properties and thermal stability, good electrical insulation properties; for black slip of paper tape, audio equipment, tapes, optical shading purposes, and are welcome to inquire!





    

   Cream PET polyester film Mylar film

Milky white film PET film PET film PETpet * (mainly engaged in the United States DuPont, Toray, Japan, France and Taiwan Korea and other white PET film): also known as reflective pet film, pearl pet film, pet film of pure white, with (translucent, not transparent light, reflective material of three white PET film), optical light source for backlight lamp material: from dimethyl terephthalate and ethylene glycol sections and special blend of polyester masterbatch by a certain percentage in the relevant part of this dissertation heating, after transesterification and vacuum condensation, thin films made of biaxial stretching. Has excellent heat resistance, dimensional stability and low light transmission rate and so on. Film base has been widely used in printing, advertising film based, digital printing, magnetic cards, labels, membrane switches support the body and other industries. Can be customized cut into rolls and sheets of different widths.

Thickness: 0.023mm, 0.025mm, 0.03 mm, 0.036mm, 0.038mm, 0.05mm, 0.075mm, 0.1mm, 0.125mm, 0.15mm, 0.175mm, 0.188mm, 0.2mm, 0.25mm, 0.3mm, 0.35mm .

Width: 35mm-2000mm

Excellent optical properties of resistance

Wetting the surface tension of large, easy process

Pure white eyelet, etc.

For the tape of a belt, IC cards, signs, composite, printing, gluing, coating glass

And a variety of backlight source significantly depending on the reflector device, the electronic original film in its original packaging, anti-static membrane packing, outsourcing

 





   Water 5760

Water Industrial Tape Backing: Nonwoven Adhesive: Adhesives Model # 5760 Size :5-1200MM * 50M Thickness: 0.14MM Features: Excellent resistance to rebound, with good punching properties. Uses: used for the paste resin nameplate, stamping process for the refrigerator cooling pipe fixed.

Water Tape # 5760 is a non-fiber material as a basic one-sided adhesive, for difficult polyethylene sheet, polypropylene sheet, etc. may also have a strong adhesive polyolefin plastic with adhesive after heat resistance; its characteristics: viscosity and strong, able to maintain long-term stability and performance; for as polyethylene, polypropylene and other objects are also difficult to glue stick and a strong force, but also for other objects strong viscosity and strength; has good heat resistance, durability, long term reliable, and inexpensive